Quote:
Originally Posted by PEU186F
Take a look at the resources on this same site and you will see that the 408, 409 and 410 shared the same system with three mounting points each side, the front being suspended from the chassis cross member at the rear of the engine bay, a second behind the silencer and the third under the boot floor close to the rear of the car.
|
Thanks, Roger. I did look at the resources but only found this pic which seems to show only 2 hangers per pipe.
Resources - Bristol Cars - Owners and Enthusiasts Forum
Having a non-standard engine, I haven't got the exhaust manifolds shown in the parts books. Mine are standard Dodge items for the 360 and have very little clearance to the engine bay sides.
David