"H",
I have stripped the paint off many Bristol's over the years and found paint stripper and scraper works the best . Sometimes it needs three applications and the final one needs to be finished with various grades of wet and dry sandpaper with plenty of water.
Your method sounds quite slow and therefore time consuming .
But you have most of it off the external body skin now .
Are you planning the strip the paint off the door , boot and bonnet openings/frames? If so this will have to be done with paint stripper , scraper and wet and dry sandpaper.
There are plenty of Bristol engines and gearboxes available but prices vary a lot depending on type and condition. I have heard the family of the late Brian May could have at least ten engines and fifteen gearboxes that would all be for sale .
Condition of any Bristol 6 cylinder motor or gearbox is most important as the rebuild cost could be more than the purchase price.
What is the saying "Buyer beware"
Regards
Geoff
|