View Single Post
  #34 (permalink)  
Old 21-02-23, 04:35 AM
Kevin H Kevin H is offline
Member
 
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,170
Default

Well done David!
That was quite a job! Must be very satisfying to get the subframe off. In some ways it's fortunate that you are restoring everything because it means get the angle grinder out if need be.

Looking forward to seeing how you tackle the Wishbone Challenge :-)

When you get the wishbones off, in the past I wrote a post about getting to bushes out.

Probably don't need to tell you this, but make sure you clearly mark the wishbones arms so they can be re-assembled exactly where they were orignally.

Kevin

Last edited by Kevin H; 21-02-23 at 02:11 PM.
Reply With Quote