Thanks for your support. I did not take apart the shafts/gears. The synchros are new and some bearings are as well. The Gearbox looks clean.
When shifting from 4th or 3rd into neutral by pushing the sliding piece by hand over the snchro and gear, the sliding piece is binding lightly on the synchro. In 1st and 2nd that is not the case.
Is there any manual, I can look up numbers for desired play? In the arnolt bristol workshop manual I can only find measurements for the distance between gears.
In addition: Can anyone give me a trustworthy gearbox specialist in central europe? As you say, I am actually hesitating to dive deeper into the box.
|