Quote:
Originally Posted by Blenheim Boy
I also employ a method, apparently championed by Setright, of traversing speed ramps with greater smoothness. By applying the brakes with a quick stab of the pedal, just as the front wheels meet the sleeper, causes the suspension to be compressed from above and below, cancelling out the thump.
|
As a Fleet driver trainer, my advice would be to brake (if needed) before the ramp and release the brakes just before the upslope.
This allows the nose of the vehicle to rise just as the wheels try to rise, giving some relief to the shockers.
Your (Setright's) technique means that the suspension is already compressed, at a time when it is supposed to start doing it's work, putting a greater strain on the shocker turrets.
Another technique, often used by chauffeurs on driveways with those short high type of bump, is to angle the vehicle so that you traverse them one wheel at a time, this is of course doen very slowly and is not a normal roadway method.