air leak at top front corner of driver's door
Don't know if it's the same, but I had serious wind noise from the 411 when
I got it in 02. Bought the kit from Bristol - essentially new rubbers, and
they were a pig to fit and didn't make a great deal of difference.
Realising that this was caused by wind coming through, and this is solved
domestically by draught excluding strips, I found some old P cross section
adhesive strip in the garage. I put this round the windows to make a seal
with the door frame when closed and the improvement in noise was very
marked. That must have been about 5 years ago and is still OK. It's about
10mm wide by 6-7mm high at the curve of the P, don't know who made it as I
no longer have the box.
Cheers
Andy
|