Quote:
Originally Posted by Claude
. Penetrating fluid, sometimes vibration, if it has two threaded holes for a steering wheel puller you can put in bolts and try pulling. But it probably is easier to buy a puller.
|
Thanks Claude. I have now managed to lay the dash panel down on top of the steering column without removing the steering wheel - I forgot I needed to disconnect the odometer reset cable and the oil pressure gauge feed.
It was a bit more work than I anticipated (it always is), but not such a bad thing because I found that the oil feed connector to the oil pressure gauge was barely finger tight - got enough oil leaks on my engine without one behind the dash!
I have taken some photos which I will upload in a couple of hours (no time right now).