Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 6 cyl Bristol cars

6 cyl Bristol cars Type 400 to 406 - restoration, repair, maintenance etc

AP Fuel pump

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #15 (permalink)  
Old 08-04-14, 10:49 PM
Member
 
Join Date: Jul 2008
Location: Sydney, Australia
Posts: 416
Default

Peter & Graham ,
further comments
1. you need one paper filter between the pump & the rear carb ,not two on the suction side , this could be a part of the problem with the pump having to suck through two filters that could be partially blocked.
2. An Electric pump at the rear will push the fuel through the original AC pump , my AC Ace Bristol was set up like that .
2. I agree Graham a pressure regulator might be needed at 4.5 psi or the needle & seat could flood the carbs .
More Problems ,Polarity another problem .

3.I'd buy a low pressure SU pump as a temporary fix (even a used one )which will give 2 - 3psi for the wedding then fix the AC Pump , as I have mentioned before they are a very simple forgiving design .
Geoff
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 07:32 AM.


This is the live site

Content Relevant URLs by vBSEO 3.6.0 PL2