Bristol Cars - Owners and Enthusiasts Forum

Bristol Cars - Owners and Enthusiasts Forum (https://www.bristolcars.info/forums/)
-   6 cyl Bristol cars (https://www.bristolcars.info/forums/6-cyl-bristol-cars/)
-   -   405 Heater box area - paint finish or felt lined ? (https://www.bristolcars.info/forums/6-cyl-bristol-cars/2326-405-heater-box-area-paint-finish-felt-lined.html)

JoeF 27-08-24 12:23 PM

405 Heater box area - paint finish or felt lined ?
 
I’m busy removing pieces of old felt and glue from the scuttle area where the Smiths heater box goes. I’m not sure that the felt is original - some areas are paint finish only and one painted section still has the tape over the hole for the radio to amp cables.
Do you know whether the 405 came with felt in this area, or just a paint finish ?
Thanks
Joe

dcburgess 28-08-24 07:12 AM

Definitely go with felt - it stops tools etc stored in the compartments rattling

flyinghorse1 31-08-24 08:02 PM

Joe,
My 400 (not 405)has a heater and felt in that area with a circular cut out in felt.
Think my heaters a spiral wound Clayton tho.

peterf 21-09-24 01:59 AM

RE: 405 Heater box area - paint finish or felt lined ?
 
Hi Joe F
Our 405 has felt, its been in the family since 1964 so fair to say its original.
Cheers
Peter F

JoeF 24-09-24 02:22 PM

Thanks for the replies. I'll go with the felt, then.


All times are GMT. The time now is 07:53 AM.

This is the live site


Content Relevant URLs by vBSEO 3.6.0 PL2