DJ,
About 15 years ago I bought a large parcel of Arnolt parts from USA , mostly new old stock mechanical with a few body panels & hardware .
These were reputed to be the last of the Arnolt parts from the Arnolt Corporation.
Most of what you require has been sold .
I have new dash knobs and possibly some switches and a good range of new & used mechanical pieces. I think there is one rear fender & two scuttle/dash panels
Gauges or basically the same as Bristol 405 and should be available ex UK from one of the Bristol Breakers.
The triple gauge can be made up using a Landrover triple gauge
External lights & period mirrors are readily available from Holdens ex UK
Windscreen post , you were about a month to late . I just sold the last I had .
These can also be fabricated from a sample
I suggest you locate another Arnolt nearby and inspect and measure what you need .
Grille can be fabricated from a sample/pattern
Are you doing the mechanical restoration as well??
Geoff Dowdle
Sydney/Australia
|