Quote:
Originally Posted by 405dh
I have had this problem on my 405 for far too long. If I remember correctly, there is a toothed quadrant that engages with a toothed wheel where wear causes skipping when under load. So, winding the window down is no problem but up, under load causes the teeth to skip. I sent the mechanism away some years ago to be repaired but came back unresolved.
Has anyone solved this?
|
The slipping problem you have is different to the worn clutch problem that I had that allowed a closed window to be pushed up and down -- your problem can sometimes be cured by moving the quadrant to a different position where the worn part isn't in contact with the gear, as all of the quadrant isn't used in the full window travel. --- it will only get worse !!