[Blankczechbook]

update - the ford discs almost fit.


the fixing bolt dia is the same ( 4 & 1/4" ) - it is a smaller dia than the studs for the rims.
the height and thickness are good, but the braking surface isn't enough wide enough to take the full pad.

& also -until the outer diameter is turned down on a lathe i can't tell for sure is the caliper might foul the hub of the disc - it is a very close call.

one option might have been to grind the inner edge of the pad away, but that is bodge I will not do. - though i had considered it as an option.

- when all other options dry up this may be a valid course to take, but not today - so for future reference only - focus 2 rear discs!