Bristol Cars - Owners and Enthusiasts Forum
Page 2 of 2 < 1 2
Show 40 post(s) from this thread on one page

Bristol Cars - Owners and Enthusiasts Forum (https://www.bristolcars.info/forums/)
-   8 & 10 cyl Bristol cars (https://www.bristolcars.info/forums/8-10-cyl-bristol-cars/)
-   -   411 Door handle and Bonnet (https://www.bristolcars.info/forums/8-10-cyl-bristol-cars/1959-411-door-handle-bonnet.html)

Kevin H 30-07-21 05:52 AM
Quote:
Originally Posted by Philip (Post 11327)
By that point the Magnum small block was obsolete,

That didn't stop them in the past. They could have used the LA engine in the 410, but they continued using the 318 poly A series after it had ceased production.

Philip 30-07-21 08:48 AM
They could have done, of course - but as this was an upgrade to a modern drivetrain, who’d really choose a Magnum/A518 ahead of an LS3/6L80?

Zorglub 08-08-21 05:45 PM
1 Attachment(s)
LS376/4L75E installed in a 410 Series 6

peter dowdle 15-08-21 06:09 AM
What is a 410 Series 6

Zorglub 17-08-21 08:37 PM
It’s shorthand to describe a 410 upgraded by the factory to new suspension, brakes, engine etc. Similar to what they did with the 411s

Xseries 20-08-21 12:14 PM
Data
 
From that chassis number the car would be a Series 4 probably started in late 1974 and finished in early 1975.


All times are GMT. The time now is 11:31 AM.
Page 2 of 2 < 1 2
Show 40 post(s) from this thread on one page

This is the live site


Content Relevant URLs by vBSEO 3.6.0 PL2