![]() |
![]() |
|
8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
|
|||
![]() Greg,
You're so right, it's such a shame not all the Bristols were as truly beautiful as the 412 but hey, that's life! There always has to be something in second place. By the way wasn't the Speedster based on the Bullet - the factory's development car? Philippa |
|
|||
![]() Your certitude is overwhelming. I can no longer
think of the 412 without also thinking of "beautiful". To this simple pairing, allow me one small contribution: "not". OK, I really like 412s. I would be proud to own one too. I believe that an updated 412 design with a fixed top would make a compelling new Blenheim. My only problem with the 412 is the Greenhouse. The cabin looks too tall, and the windscreen a bit to upright. Otherwise, it is pretty cool. Greg |
|
|||
![]() All the V8 Bristols look a bit tall from the front because they are
relatively narrow and sit on the deep chassis, canting the windows in, raking the windscreen back, dropping the roof line by a couple of inches and dropping the seats to compensate for the lost headroom would probably deal with this. Flaring the rear out would help the look of the overall stance. The Beaufort has a different screen which is much more raked back. Interesting proposition that the 412 could form the basis for a new Blenheim. Perhaps it could sit between the the Blenheim and the Fighter as a compromise option between comfort an out and out supercar. Paul |
|
|||
![]() I did n`t know the Beaufighter had a different windscreen. A photo? Making
it a hard top would completely spoil the 412 concept for me. And it certainly looks at it`s best with the roof down. Incidentally, what do Bristol do to uprate the 412 (as someone`s recent post)? P |
|
|||
![]() One of the things I like about the 412 is that with the roof off and
because of the targa roll bar it looks like a two seater when it is actually a four seater tourer. On the upgrade front, you can have whatever you want. I am going to get my engine uprated with an extra 30% power and torque in the autumn at Bristol cars, which is as far as you can go on the carb 360 engine without compromising smoothness. I had thought about fitting a double turbocharger but with what is on offer down the normally aspirated route it isn't necessary.They have already adjusted the ride and shocks so that it really digs into corners. The 412 are the best handling of the V8s. BCL do a 6.3 and a 6.7 fuel injected option that drops straight in with well over 450 BHP, or you can have more! |
|
|||
![]() The 412 and Beaufighter are undoubtedly the most distinctive models Bristol ever made. The Beaufort however, to me at least, is the prettier. It's a shame they only made one.
I remember well the stories in the press in the 70's telling us that the convertible was dead due to new US legislation that would outlaw any car without a roof or roll over bar. How times have changed! As to a 'new' version of the 412, yes with the right layout it could sell in modest numbers, for Bristol, be it a 2 seater, 2+2 or full four seater. Would it have the same layout as the 412, meaning having an integral roll bar, of that i'm not so sure. Keith |
|
|||
![]() How come?
The 412 has exactly the same chassis, suspension, steering etc as the 411, so why would it handle any better? (Should I move these later posts to a new "412 love-in" thread?) |
|
|||
![]() Principly because of a lowered center of gravitydue to the bodywork
and the reinforcement in the chassis and a lower stance on the front. They dig into corners better. I notice the difference compared to my Brigand but the guys at BCL all say the same thing. |
|
|||
![]() I'd be surprised if there was that much difference in handling due to
differences in chassis and body. Sure, there is no solid roof on the 412 but there is a darned great targa arrangement. There is a little more overhang at the back but it's only an empty boot. Overhang at the front is surely about the same. The one change there might be significant to handling is the 360 engine in the s2 which I believe to be considerably lighter than the earlier units in the 411 (and first few 412s). P |
|
|||
![]() Hi Peter. The 360 engine is a lot lighter than the 400 but the
reduction in power is compensated by the drop in weight. The engine is set lower I believe but there a lot of additional steel in the chassis. There are two large reinforcing plates under the driver and passenger which sit on the polar moment of the car which also shift the weight from above the roll axis to below it which reduces body roll to a degree by reducing the roll center and concentrating mass inside the wheelbase. The shift of weight towards the lower half of the car and the fact that the 412 S1 (400 engine) weighs in at 1714 kg as opposed to 1783 for a 603 with the lighter 360 engine gives some indication of the difference in total mass reduction. As I am not an engineer so I can't explain further, I can only report that my S2 is very well balanced, especially with the front shocks on a hard setting and the rear set quite soft. Perhaps some other 412 drivers can elaborate? Paul |
|
|||
![]() Having delved about under the thing, I didn`t see enormous weight in
"plates". Replacement of exhaust manifolds (did`nt weigh them but they are seriously heavy) plus heads (weight even more ditto) and inlet mainifold more relevant as they are all at the top of the engine. I think my new gearbox is supposed to be lighter but that is lower down. My s2 certainly handles better than ever. I think some later models have the engine lower between the chassis rails. That would be a benefit. As to suspension, I run a compromise .... exhaust scrapes if I`m careless but generally OK. P |
|
|||
![]() [quote]
How come? The 412 has exactly the same chassis, suspension, steering etc as the 411, so why would it handle any better? (Should I move these later posts to a new "412 love-in" thread?) [End Quote] Kevin, There's no need to feel bad about having a lesser model- you too could own a 412 one day - just don't give up on your dream! As far as handling is concerned it is simple, just look how aerodynamic the 412 is! Philippa |
|
|||
![]() Hi Phillipa
to make a quote box Quote:
|
|
|||
![]() Quote:
A slight change in centre of gravity, and a slight change is all that is achievable, will make no material difference to the car's cornering abilities. Any gains would be far outweighed by changes fitting wider wheels and tyres. If the chassis has been reinforced in later 412s it would only mean that BCL came to the conclusion that chassis rigidity had been compromised in the first place by losing the roof! It is in the tyres, wheels and suspension set up where the big cornering gains can be made. But between the 411 and 412 (s1) there are no differences here, (I don't know if later 412 s2/3 differ in the suspension, but I doubt it). Both 411 and 412 s1 will benefit from replacing the steel wheels with the lighter Avon Safety wheels and wider tyres. I noticed a marked improvement in my 411 with this change. As for weight reduction, simply reducing sprung weight (engine, transmission, body etc will mainly affect straight line acceleration and stopping distance. To improve cornering through weight changes you need to reduce the sprung/unsprung weight ratio by reducing the unsprung weight (not the sprung weight). In fact reducing this ratio by reducing sprung weight can have a detrimental affect. Although the weight changes between the 400 and 360 engines would not have very much affect either way given the overall weight of these cars. |
|
|||
![]() A couple of points, all of the 412s were reinforced underneath as
this was required by the authorities at the time to avoid having to re-crash the cars rather than for need. There is no noticeable scuttle shake on my S2, I can't speak for the earlier cars although I am told there is a very small degree of chassis flex in extremis on the all cars from the 407 to the 412, which is absent in the later 603/Blenheim series which are more rigid due to the amount and location of steel in the roof and upper structure. I can't agree with your dismissal of the effects of lowering weight, especially lowering the center of gravity and the roll axis. Try driving any car with a full roof box for a practical demonstration of the effects of this. My old BMW handled significantly differently with four passengers than two, and the shift infront/rear weight balance from that was small but it affected the cornering and roll. Sprung weight does affect cornering dependent on where it is, due to increased/decreased lateral momentum and the effects of roll. Aerodynamics have an effect over about 70 mph on cars but who knows what the positive or negative theoretic effects of this are between different Bristols other than by observation. As I previously noted I am not an engineer, but I do appreciate the accumulated effects of small changes in practice. That is, after all, why manufacturers are always tweaking their cars. The 411 has the engine set back further than a 407 for example which changes the yaw axis and transforms the handling between the two cars. The 407 was 'disappointing', although I can't personally verify that as I haven't driven a 407 so I rely on the reports in the media and Mr Setright on that one. Set up does matter greatly but it is the sprung weight that you are supporting and that does affect the dynamics. Paul |
|
|||
![]() Paul,
I was talking about handling differences between the 411 and 412 - I am not at all surprised that a 407 doesn't handle as well. Apparently incremental improvements were made between the 407 and 411/412 due to increasingly more subtle changes in steering and suspension geometry and spring rates (devised by Mr Sevier if my memory is correct). Of course a car handles differently if you put a carrier on the roof, or if it's full of people. However, my comments were in the context of what you said about engine position, and weight, centre of gravity and cornering. I still maintain that the differences you mentioned, between the 411 and 412, would not create any material difference between the handling of the two cars, all other things such as wheels/tyres etc being equal. Kevin PS. We are allowed to disagree ![]() |
|
|||
![]() Hi Kevin, I started with my own experience on the relative
difference, but as 'why' was asked I thought I should go off and check for myself. I have now managed to lay my hands on some facts and figures on this handling issue, which do explain my thesis. The 412 S1 has 32% more torsional rigidity than the 411 although the beam rigidity is the same, The 412 S2 has the bars at the top of the windows connecting the A and B pillars and other chassis modifications so the torsional rigidity rises to 45% more than the 411 with 25% stiffening in beam rigidity. The effect of this is to make the car respond more readily to steering input as it maintains the alignment of the the suspension better, reduces the oscillating effect of flexion in the chassis. It explains why it hunkers down in corners more readily. The other data to hand now is that the center of gravity is 8 mm lower in the 412 than the 411, which I thought sounded small, but the effect is magnified because the center of gravity on a 411 is 80mm above the roll axis, whereas it is 72mm on the 412 ( and lower again on the Beaufighter).That represents a 10% improvement in the roll couple ratio which does make a difference to the balance of the car. In a perfect world the center of gravity would sit on the roll axis, but there you are. Some other interesting technical stuff I picked up is that the Blenheim is three times stiffer than the 411 and the Blenheim had the highest torsional rigidity of any passenger car up until '98. It is stiffer than the McLaren F1. The reason is that the chassis is further reinforced, but the body skeleton acts as a monocoque in it's own right, but in addition the panels are rigidly fixed to the skeleton and provide further stiffness an they they are thicker than normal. Anyway, yes we are free to disagree, but I am happy in my own mind that I understand the reasons behind the claims for the 412 handling and having observed them in the wild I am going to take by 412 out for a bit of a thrashing this afternoon! regards Paul |