Bristol Cars - Owners and Enthusiasts Forum

Bristol Cars - Owners and Enthusiasts Forum (https://www.bristolcars.info/forums/)
-   8 & 10 cyl Bristol cars (https://www.bristolcars.info/forums/8-10-cyl-bristol-cars/)
-   -   603S2 Distributer (https://www.bristolcars.info/forums/8-10-cyl-bristol-cars/706-603s2-distributer.html)

will7262 30-04-11 02:40 PM

603S2 Distributer
 
i have discovered my dizzy has points with vac. advanc. I thiught these came with an electronic distributer? well that what I have read.
Obviously I want a fully electronic device so can anybody advice on the options or if they have experience regarding this?

Ronald G. Stephenson 30-04-11 06:35 PM

A distributor, or Electronic Ingnition Upgrade
 
I am not familiar with the model you have, but if it's drivetrain is either a small block or big block Chrysler product, it is a simple matter to use your same distributor and install a Pertronix ingnition. This small device fits inside your stock distributor and converts it to Electronic. It will also use a coil (they have an excellent one) or your stock one. Their coil will handle a full 12 volt charge, giving much hotter spark, whereas your stock coil must run at a lower voltage to prevent it from overheating, but you can use the stock coil on this system, and keep your voltage dropping resistor in line.

will7262 01-05-11 03:56 PM

Distributor
 
Ronald
Thanks for the advice I will look into the sugested system


All times are GMT. The time now is 10:06 AM.

This is the live site


Content Relevant URLs by vBSEO 3.6.0 PL2