Peter
If you use the search facility on the site, type in Bristol S2 Heater Shelf it should give you about three results click on the one from califironiabristol and it should show you the photograph I referred to 1st left,one of the other photos shows it as well.
What you have basically is an L shaped piece of metal mounted on the bulkhead in front of the heater to attach the bottom of the cover to,I have in the back of my mind having seen this cover fixed on the front or outside of this strip but obviously there would still have been a metal strip within the vinyl cover to take the screw or rivet attachments.
Knowing how Bristol liked to put their cars together I suspect rivets would have been used in preference to screws.
Geoff.
|