Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Non Bristol Forums > Other Cars

Other Cars Discussion about car marques other than Bristol

Bristol alternatives.

Closed Thread
 
Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 04-11-08, 11:24 PM
Member
 
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,170
Default

Quote:
Originally Posted by TLF799R View Post
What is it with you boys - you claim to love the cars then all you do is run them down.
It's not blind love!

Quote:
Originally Posted by TLF799R View Post
Correct me if I'm wrong but doesn't the Fighter have a specially developed air conditioning system, designed for the car at great cost?
I don't know if you are right or wrong, but who was talking about the Fighter? My comments specifically mentioned V8 Bristols.

Quote:
Originally Posted by TLF799R View Post
It would have presumably been much easier, as other "supercars" do, to pinch theirs from cheap mass produced cars but Bristol didn't do that. They wanted to make their car smaller and lighter so they designed their own!
How do you know it's not straight out of the Viper?

Isn't that where the chassis came from?
  #2 (permalink)  
Old 04-11-08, 11:50 PM
Guest
 
Join Date: Sep 2008
Posts: 43
Default Bristol alternatives.

Philippa, we were talking generally about the main model the Blenheim 3 and
not the Fighter which sets a good future for the company.

As far as safety, until the cars go through Euro NCap tests then your views
of the safety record is not viable. Bristol cars are rare as hens teeth and
so the odds of them being in severe crashes is a lot less than a higher
production model.

Also, are you really saying that because some of us have made a critcism of
certain models, then we should go elsewhere? Anybody who really cares about
a marque will make criticsm and on this occasion, it is genuine and heart
felt and not done for the sake of being nasty. Other marques face criticism
from their customers and enthusiasts all the time, they listen and if there
is a need they will act on it.

Andrew
  #3 (permalink)  
Old 05-11-08, 04:21 PM
ex Member
 
Join Date: Jul 2008
Posts: 54
Default

Hi Andrew,

Quote:
As far as safety, until the cars go through Euro NCap tests then your views of the safety record is not viable. Bristol cars are rare as hens teeth and so the odds of them being in severe crashes is a lot less than a higher production model.
Sorry if my views are not as valid as the rest of yours...!

My view, unlike yours, is based among other things on informed comment from a Blenheim owner I met at the factory when picking up our car. He had been in a high speed 8 car motorway pile up where every other car had air bags (some as many as 7).

He was the only driver who emerged unscathed. What the government tests fail to take into account is that should you be involved in a multiple impact your airbags have been and gone once the first car has hit you. You are then presumably sitting in a car designed to protect you through the air bags that doesn't then have them as car number two hits you!

He walked away from the accident thanks to the strength in the Bristol chassis. Of the other people in the accident some were still in hospital 1 month later presumably collecting the insurance money from their write offs when he was collecting his repaired car from the factory.

I would much rather rely on the design of a car to save me than some kind of "GCSEs for cars" created by a government who you all seem to have very little faith in the rest of the time!

Quote:
Also, are you really saying that because some of us have made a critcism of certain models, then we should go elsewhere? Anybody who really cares about a marque will make criticsm and on this occasion, it is genuine and heart felt and not done for the sake of being nasty. Other marques face criticism from their customers and enthusiasts all the time, they listen and if there is a need they will act on it.

Andrew
I don't mind informed comment about the cars as I said to Kevin, I just feel it should be exactly that - informed!

Philippa
  #4 (permalink)  
Old 05-11-08, 05:17 PM
Requiescat in pace
 
Join Date: May 2008
Location: Nr Oxford, UK
Posts: 63
Default Bristol alternatives.

Philippa,

I agree that the Fighter has a unique chassis and probably may have a
uniquely configured air con system , but I suspect the air con will be based
around off the shelf components matched to suit the requirements of the
Fighter, not bespoke down to the ECU and sub components. That would be
farcical economically and something simply not worth doing.

Most large scale auto manufacturers use common components configured to
their specific requirements but often shared amongst several brands/marques.
A classic example (not air con) is the half shaft (drive shaft) off a
Porsche 928. It is more than £450 off the shelf from Porsche and is a
direct swap for the same item used on a Ford Granada of the same era (price
£195). All made by GKN. Similarly air-con units largely come from 3-4
global suppliers. Bosch supplies so much to the auto industry one has to
ask the question, what apart from body and chassis design do the car makers
actually do (lots really). Even engines and gearboxes are routinely shared
these days (Borg Warner / Getrag / etc, or Alfa/Fiat/Vauxhall/Saab with
diesels or even BMW Mini/Peugeot/Citroen diesels to name a few). Everything
from ABS and braking systems to other sub-systems are designed and produced
by third parties. Indeed it is a strength that such outsourcing of common
systems is used, especially for Bristol - makes it better for us who make
the time and effort to keep them going. My 406 will have a latest model
Dana Spicer rear axle and modern front disc calipers, plus other nice shiny
3rd party stuff added for convenience and ease of maintenance - including a
fully integrated off the shelf air con unit.

As to crash worthiness it is of great importance that energy is absorbed by
the structure as much as possible instead of the people inside. Rather than
blame the lack of available airbags (designed to help keep moving body parts
from too much acceleration and impact damage), the issue you raise about a
multiple car pile up is more related to the subsequent lack of impact
(energy) absorption by an already crashed car by another impact. This is a
catch 22 and unfortunate. Although having said that the basic cell
structure of most moderns remains pretty strong even after front and rear
impact absorption. Fewer deaths occur due to high speed (30-50mph) impact
than say 20-30 years ago (pro-rata). Even better still are injuries due to
impact of body parts inside the car.

The Bristol (V8's) has excellent rear impact absorption (relatively weak
(soft) structure) attached to a solid structure and similarly same at front
above chassis line and before engine. Side impact is good too as long as
the impact is below knee height until it hits the inner chassis rails. In
any event, the guy in the heavier object always comes off (almost always)
better than the guy in the smaller one. A V8 Bristol weighs in at 1700kgs
about the same as a modern BMW 5 series or smaller 7 series.
  #5 (permalink)  
Old 05-11-08, 05:50 PM
Guest
 
Join Date: Sep 2008
Posts: 43
Default Bristol alternatives.

Philippa your comment of the guy surviving the crash is not a scientific one
and is therefore not viable as the Blenheim was not in the same posotion as
all the cars involved. The official tests also show how the car deforms in
a crash dissapaiting the energy and how it handles impact (modern cars
deform whereas older cars didn't causing injuries to passengers) and where
the pedals go for example. Recent tests also found, if a small Renault
Modus was travelling at 30mph and a Mercedes E-class (W124) from the late
1980's pulled out and was hit side on, the Mercedes driver would likely be
killed. Whereas if the roles were reversed, the Renault driver would walk
away. Mercedes cars are known the world over for being some of the safest
and toughest cars in existence. I prefer proven science on a like for like
basis, rather than a guy i met happened to be ok in his car in 1 crash. Oh
and most crashes aren't multiple pile ups, they are single impact. Modern
crash zones are 'proven' by many reliable sources (not just government
tests) to save lives, ignorance doesn't!!

On the case of your argument of not needing an electric opener of the rear
window. What about on days when the air con isn't needed but the passenger
wants fresh air, are we to deny them because you don't see the need for it?
Manual openers are a poor mans way of opening the window and an
impossibility for many older generations who simply cannot reach across.

Andrew
  #6 (permalink)  
Old 05-11-08, 10:02 PM
ex Member
 
Join Date: Jul 2008
Posts: 54
Default

Quote:
Philippa your comment of the guy surviving the crash is not a scientific one and is therefore not viable as the Blenheim was not in the same posotion as all the cars involved.
I never claimed it was scientific, however, this doesn't meant it isn't valid (or viable as you call it). Surely anecdotal evidence is often the trigger for research that wouldn't have happened if no one had shared their practical experience?

Do you work for the road research lab (or whatever the EU say we can call it) by any chance????

Quote:
On the case of your argument of not needing an electric opener of the rear window. What about on days when the air con isn't needed but the passenger wants fresh air, are we to deny them because you don't see the need for it? Manual openers are a poor mans way of opening the window and an impossibility for many older generations who simply cannot reach across.
Andrew, I'm afraid it wasn't me that said it wasn't needed. I'm all for allowing oldies air.

If you all drove 412s you wouldn't need it you could just drop the hood down! LOL

Philippa
  #7 (permalink)  
Old 05-11-08, 11:00 PM
Guest
 
Join Date: Sep 2008
Posts: 43
Default Bristol alternatives.

Sorry Philippa i thought it was you who said it, i'll smack myself on the
wrist very hard LOL. On the subject of a convertible, imagine an open top
Fighter, now there's a thought.....

Andrew
  #8 (permalink)  
Old 05-11-08, 02:17 AM
Member
 
Join Date: Oct 2008
Location: Monschau/Germany, near the Belgian border
Posts: 107
Default

Quote:
Originally Posted by Kevin Howard View Post
How do you know it's not straight out of the Viper?

Isn't that where the chassis came from?
The chassis? You probably mean the engine.

Regards,
Markus
  #9 (permalink)  
Old 06-11-08, 08:35 AM
Member
 
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,170
Default

Quote:
Originally Posted by Markus Berzborn View Post
The chassis? You probably mean the engine.

Regards,
Markus
No I did mean the chassis. Just thought I would throw that one out there and see what the reaction was

We all know the engine is a Viper engine, and presumably the transmission, but I assumed that Bristol made the chassis.

However, just last week I was talking to a guy who recently visited Chrysler in Detroit. He is doing some development work on another model of car to utilise the Viper engine so he had some meetings arranged with Chrysler people. They looked after him, picked him up from his hotel, took him out for lunch and gave him a tour of the Viper production plant. These guys were very forthcoming with information until he asked if the Bristol Fighter used the Viper chassis - "No comment" was the response.

Now if Bristol were not using the Viper chassis it would be very simple for the Chrysler guys to say that. But when anyone declines to comment when asked a simple yes/no question, that makes me suspicious.

Why would Bristol not use the Viper chassis? It's a great chassis, well proven and successful in racing versions of the Viper. It would also have saved them a fortune in development costs.

Has anyone ever seen a reasonably detailed description of the Fighter chassis?

Last edited by Kevin H; 06-11-08 at 08:36 AM. Reason: typo
  #10 (permalink)  
Old 06-11-08, 02:40 PM
Member
 
Join Date: Jul 2008
Location: USA
Posts: 220
Default

Quote:
Originally Posted by Kevin Howard View Post
No I did mean the chassis. Just thought I would throw that one out there and see what the reaction was

We all know the engine is a Viper engine, and presumably the transmission, but I assumed that Bristol made the chassis.

However, just last week I was talking to a guy who recently visited Chrysler in Detroit. He is doing some development work on another model of car to utilise the Viper engine so he had some meetings arranged with Chrysler people. They looked after him, picked him up from his hotel, took him out for lunch and gave him a tour of the Viper production plant. These guys were very forthcoming with information until he asked if the Bristol Fighter used the Viper chassis - "No comment" was the response.

Now if Bristol were not using the Viper chassis it would be very simple for the Chrysler guys to say that. But when anyone declines to comment when asked a simple yes/no question, that makes me suspicious.

Why would Bristol not use the Viper chassis? It's a great chassis, well proven and successful in racing versions of the Viper. It would also have saved them a fortune in development costs.

Has anyone ever seen a reasonably detailed description of the Fighter chassis?
Your assumption was correct, but then you stop doing justice to Bristol's aircraft-derived engineering practices. A simple inquiry of Bristol Cars LTD elicited the facts that there is no secret about the Fighter chassis; The car has been shown in chassis form both at shows and in the showroom. The two chassis are completely dissimilar.

Last edited by browning l; 06-11-08 at 02:55 PM.
  #11 (permalink)  
Old 06-11-08, 02:56 PM
Member
 
Join Date: Jul 2008
Location: London UK
Posts: 7
Default Bristol alternatives.

This may be a case of adding 2 + 2 and getting 5, But I seem to remember
that David Martin who at one time owned a considerable number of Bristols in
the UK (over 20) and from whom I bought my 400 in 1973, was murdered in the
eighties , I think, and that his body had never been found. I seem to recall
that his business partner was convicted and given a very long sentence but I
have no other details that I can remember of the story.

I don't recall seeing the story that you read about more recent events and
my "connection" is tenuous at best, I think.

Jon
  #12 (permalink)  
Old 06-11-08, 04:02 PM
ex member
 
Join Date: Aug 2008
Location: Nr. Stroud, Glos
Posts: 141
Default Bristol alternatives.

I knew David well, he was a Rock and Roller and found him a man to
run his company and build to the point where he was able to sell it
for a fair amount of money.
He was murdered by two bit conman who'd sold a him a few non existent
cars and two dismantled Robinson Helicopters in a Lorry container that
didn't exist either. The total bill was £200K and David's Solicitor
persuaded the chap to sign a promise to repay it. He didn't have the
money but he did have a collection of pistols and he used one to shoot
David.

I think David had two 400s, 1 Arnolt and one 411ish. Most were with
specialists and taking longer than they should to be rebuilt or
whatever. David was easily conned I'm afraid, but had become very
famous for supplying very powerful PA systems to the biggest touring
rock groups of the day.

Ashley
  #13 (permalink)  
Old 06-11-08, 04:08 PM
Member
 
Join Date: Sep 2008
Posts: 88
Default

Wow - this thread just gets better. So out of the 3 people that have supposedly died in Bristols, one was actually murdered?
  #14 (permalink)  
Old 05-11-08, 04:05 PM
ex Member
 
Join Date: Jul 2008
Posts: 54
Default

It's not blind love!
But it seems to be rather misinformed...

I don't know if you are right or wrong, but who was talking about the Fighter? My comments specifically mentioned V8 Bristols.

I think your original comment was "When you make cars costing £150,000 and above, you find a reliable mechanism and you fit it. Excuses smacks of laziness to develop and progress and to make the car a better and more passenger friendly car."

If you check your facts you will find that the Blenheim and the 411 series 6 both have integrated air conditioning behind the dash BUT still maintain the original Bristol theory of keeping air conditioning and fresh air supply separate, which means that "fresh" air is exactly what you get rather than air passed through the heater matrix which is heated even when the heater is switched off (due to residual heat) by probably at least 5 degrees.

It seems rather against you "lazy theory" to me. You can't tell me that it is easier to produce your own system rather than use a cheap one off a run of the mill production car?

Perhaps you need to become more familiar with the dreaded V8s...

How do you know it's not straight out of the Viper?
I'm afraid I've checked my facts and it is a specially developed computerised system which is as up to the minute as you can get!

Isn't that where the chassis came from?
Sorry Kevin but the chassis has been no where near a Viper. I've driven one and also been in a Fighter and there is no comparison. The chassis is a completely modern one of aluminium and high strength steel with integral race car roll over bars built specially for the Fighter.

I don't mind considered comment about Bristols but I hate it when it is based on misinformation and "urban myth"!

Philippa
  #15 (permalink)  
Old 06-11-08, 07:47 AM
Member
 
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,170
Default

Quote:
Originally Posted by TLF799R View Post
I think your original comment was "When you make cars costing £150,000 and above, you find a reliable mechanism and you fit it. Excuses smacks of laziness to develop and progress and to make the car a better and more passenger friendly car."
No Philippa, I did not say that, I think you will find it was Andrew (Jervaulx).

Quote:
Originally Posted by TLF799R View Post
If you check your facts you will find that the Blenheim and the 411 series 6 both have integrated air conditioning behind the dash ...
I don't know what a 411 series 6 is, but I specifically mentioned the Blenheim Series 2 (with it's "chip cutter" air con unit slung under the dash). The current Blenheim may well have integrated air conditioning, and it's wonderful that Bristol have finally caught up with the rest of the automotive industry. I dare say they used up all their stock of the old "chip cutters", (which probably haven't been manufactured since the 1970s).

Quote:
Originally Posted by TLF799R View Post
You can't tell me that it is easier to produce your own system rather than use a cheap one off a run of the mill production car?
No it's not easier. Hopefully Bristol weren't so stupid as to develop their own air con system when there are plenty of excellent ones available off the shelf. Car companies should stick to making cars and let air conditioning companies make air conditioning systems.

Quote:
Originally Posted by TLF799R View Post
Perhaps you need to become more familiar with the dreaded V8s...
It's a shame you dread the V8s. I think they are wonderful cars, I really like their lines, I'm even warming to the 412, depending on the colour - your's looks quite good. The V8 Bristol (at least up to the 411/412) are quite simple cars, easy to work on and solidly built in most areas, although there are one or two spots where a little more care and attention in manufacturing would have been nice (not unlike almost all cars).

Quote:
Originally Posted by TLF799R View Post
How do you know it's not straight out of the Viper?
I'm afraid I've checked my facts and it is a specially developed computerised system which is as up to the minute as you can get!
Hmm, that sounds like a bit of air from the heater matrix to me
How is the chassis "computerised" ?
What are the "facts" and how did you "check" them?

Quote:
Originally Posted by TLF799R View Post
Isn't that where the chassis came from?
Quote:
Originally Posted by TLF799R View Post
Sorry Kevin but the chassis has been no where near a Viper. I've driven one and also been in a Fighter and there is no comparison. The chassis is a completely modern one of aluminium and high strength steel with integral race car roll over bars built specially for the Fighter.
Many different models of the Viper have been produced - which one have you driven?

You say you have "been in a Fighter" - have you actually driven one, in comparable circumstances to the drive in the Viper? (just wondering how you compared the chassis of the two cars).

Quote:
Originally Posted by TLF799R View Post
I don't mind considered comment about Bristols but I hate it when it is based on misinformation and "urban myth"!
Ha ha, that's really quite funny, given the Bristol mythology.
  #16 (permalink)  
Old 06-11-08, 01:38 PM
ex Member
 
Join Date: Jul 2008
Posts: 54
Default

For such an expert on Bristol I am surprised you are so unfamiliar with the 411 series 6???

I'm afraid I can see that I am wasting my time and that you are far happier living with your conspiracy theories. Nothing Bristol do will ever be good enough for you. If it comes out of another car it is lazy, if they make it themsleves they are stupid - they can't win!

Perhaps an open mind might help you get a more rounded view but I suspect anyone's else's information will never be rated as highly as your own in your mind.

Is there some kind of traumatic incident you had with Bristol that I'm unaware of? You never seem to be voicing these theories on any forum bar your own???

Philippa

Last edited by TLF799R; 06-11-08 at 01:39 PM. Reason: Didn't intend to include quote
  #17 (permalink)  
Old 06-11-08, 01:40 PM
Member
 
Join Date: Sep 2008
Posts: 1
Default Bristol alternatives.

I have read a number of times in historical blurb about Bristols that 'no driver has ever been killed in a Bristol' . I then read a year or two back that some bone parts were discovered by someone restoring a Bristol found in a barn and these included a bit if bone that was identified as human jaw. Does anyone have any recollection of this and what was the outcome?

George
  #18 (permalink)  
Old 07-11-08, 11:21 AM
Member
 
Join Date: Jul 2008
Location: New Zealand
Posts: 154
Default Fatalities and survivors

Quote:
Originally Posted by GBird View Post
I have read a number of times in historical blurb about Bristols that 'no driver has ever been killed in a Bristol' .
George
In the mid 1990's I visited Tony Crook, who said that three people had been killed in Bristols, one of whom had a high speed encounter with a very large lorry and another drove off a cliff (into the sea if I recall correctly... where are my notes when I need them?).

However, from a statistical perspective, have a look at http://www.scotland.gov.uk/Publicati.../08/22103446/3 which states that in 2007 there were 2.6 million cars in Scotland and 282 fatalities. That is one fatality for every 9000 cars. If Bristol really has produced its maximum of three cars per week from 1946 through 2008 (about 3000 weeks) then they would have made 9000 cars. Three fatalities means that they are three times the Scottish national average. And if production is closer to half that, which the records would suggest, then Bristols are veritable death traps... either that or this demonstrates why statistics can be useless some times.

On p 144 of Bristol Cars and Engines, Setright writes "It was... a hideous accident that eventually forced the withdrawal of Sir George White from the partnership at the end of 1973. Some years earlier, when he was driving his V8 through the grounds at Filton, it was attacked by an irresponsibly driven laundry van. In the subsequent mechanical melée he was very badly hurt - in a lesser car he would have been killed, for the Bristol went clean through a brick wall and ended up against a stout tree..."

A few pages earlier, Setright writes "Actually Bristol do rather well in the manner of compliance with safety requirements both real and legislative - and the two are no means the same. ...As usual, the Bristol [411] was once again proved a very safe car. It is a fact that the authorities have known for years: when the Road Research Laboratory was running a traffic-hazards programme that involved some crashing, they went out and bought some old 401 and 403 Bristols, because these could be crashed four or five times - a much cheaper proposition than all the others, which were useless after one crash. No wonder MIRA was not entirely surprised when the 411 set new records for low internal decelerations in their test."

Anecdotally, Bristols are known for protecting their passengers. I attach a photograph of a 410 found in Virginia in the mid 1990's when I was North American registrar (when I had business trips I would identify Bristols in the neighbourhood, make up an ID sheet to paste on the window, and take a picture for the record). This particular car was reported to have slid off a mountain into the roof of a barn. Below is my record from the time:

3-95 Chris Elliot 804-678-7552 PO Box 46 Nassawadox VA 23413 E 804-442-7374 7194 Langkdorf Hwy Nassawadox VA 410 bought from man in Port Jervis, NY, car slid off a mountain and fell through the roof of a barn! RHD. Parts car only, seats gone, tailights gone, windshield broken, no engine, rear end OK, no steering wheel, dash mostly gone, parked outside exposed to the elements. ID 7413 Elliot Automotive (NAPA) Visit VA-USA 410 1968 Bare Parts RHD

Claude
Attached Images
File Type: jpg 410 7413 _MG_8613.jpg (131.4 KB, 68 views)

Last edited by Kevin H; 07-11-08 at 01:33 PM. Reason: removed photo from post body because it stretches display and is not supposed to be possible (I need to check some settings!)
  #19 (permalink)  
Old 07-11-08, 02:50 AM
Member
 
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,170
Default

Quote:
Originally Posted by TLF799R View Post
For such an expert on Bristol I am surprised you are so unfamiliar with the 411 series 6???
Ironically just last night I read an article in the Sept Octane mag about the refurbished and modernised 411, which Toby Silverton is quoted as saying "what you might call a Bristol 411 Series VI". But semantics aside, what a beautiful car!

They have of course been doing this for a long time, the "Grief" 411 S5 being an example from 8 years ago. But the fact that they are now marketing the idea is great news for us 411 owners, because they just might start manufacturing some parts which were no longer available. It might even increase the value of the 411, which as the writer says was probably the "best looking, offering an ideal package of styling and performance".

Quote:
Originally Posted by TLF799R View Post
Nothing Bristol do will ever be good enough for you.
This is not correct, I have spent considerable amounts of time and money restoring a 411 to how Bristol built it in the first place, with a few "improvements" along the way, some of which I regret now, although the Octane article is encouraging. I wouldn't have done this if I wasn't very happy to be the owner of a Bristol. There are however things that I believe Bristol could have done better over the years, and I can assure you I am not alone in this belief.

Quote:
Originally Posted by TLF799R View Post
Is there some kind of traumatic incident you had with Bristol that I'm unaware of?
Not exactly "traumatic" but there is some history.

I believe scepticism of marketing spiel is quite healthy, and in Bristol's case there is good reason. When Bristol first started using Chrysler's engines and transmissions there were claims that these items were "Bristolised", in other words modified by Bristol's engineers to improve on Chrysler's work. There was talk of special cam shafts and even removal of hydraulic tappets which the old "A" series engines never had in the first place. Even Leonard Setright admitted in his book "A Private Car" that he had he been sucked in by these stories, to which he had unwittingly given authority that they did not deserve, by stating them as fact in his earlier book, "Bristol Cars and Engines".

Mr Guy Drummond, QC highlighted these "misconceptions" in a letter published in the BOC Bulletin of Spring 1975. As a footnote to Guy Drummond's letter, LJKS, who was the Editor at the time, said "I am suitably chastened - not to mention embarrassed".

I don't blame Bristol for their marketing strategy back then in the early 1970s, after all everyone was stretching the truth a bit in their marketing hype. In fact it was quite a clever marketing strategy which helped them sell cars for extremely high prices, despite the fact that they used a power train that was common as muck in the US.

Fast forward to Sept 2001, and an EVO magazine article about the Bristol Fighter included comments such as "We take the basic structure of the engine and 'Bristolise' it. "

Now having just torn down the engine from my 411 to find a domestic spec Chrysler 400 cid engine with nothing special about it at all (it even still had a cast crank), I concluded that if Bristol were not really enhancing Chrysler engines back in the early 1970s (my engine was made in 1973, despite my 411 being made in '76), then it was hard to believe that they were improving on the V10, which was a available as a crate engine from Chrysler with almost identical power and torque figures to that which Bristol were quoting. I expressed these views in the BOC email forum at the time.

What happened next was quite remarkable. The Patron of the BOC, Mr Crook, allegedly threatened to sue the BOC and the people running it, unless they published an apology in the BOC forum and the BOC Bulletin magazine. Apparently, Mr Crook's letter to the BOC Chairman was addressed "Dear Sir/Madam" !

Unfortunately Bob Charlton, who ran the BOC email Forum at the time, published a letter from Michael Barton who stated as fact that I had defamed and libelled Bristol Cars, when I had done no such thing. So things got pretty ugly for a little while.

The funny thing is, while this row was unfolding I visited Bristol in the UK to buy some parts for my 411 and no one said a word to me. In fact I never heard anything from Bristol at all. I think Mr Crook just wanted an excuse to muzzle the BOC.

Quote:
Originally Posted by TLF799R View Post
You never seem to be voicing these theories on any forum bar your own???
What other forum do you have in mind? I was barred from posting comments in the BOC Forum, which is why I created the BEEF mail list, which eventually led to the development of this forum.

People are free to voice their opinions in this forum, and enter into robust debate, even if they might irritate the establishment.
  #20 (permalink)  
Old 07-11-08, 11:26 AM
Member
 
Join Date: Aug 2008
Posts: 22
Default Engines

Quote:
Originally Posted by Kevin Howard View Post
Now having just torn down the engine from my 411 to find a domestic spec Chrysler 400 cid engine with nothing special about it at all (it even still had a cast crank), I concluded that if Bristol were not really enhancing Chrysler engines back in the early 1970s
I think this subject is worthy of a thread of its own. I don't have the experience you do with the cars but my understanding from what I'd read was that the engines were stripped down and 'blueprinted' - no parts changed from factory but rebuilt to aircraft engineering standards with all tolerances and torques at optimum and all the castings cleaned up. It's likely this is an optimistic view of what happened.

Has any mechanic or engineer who worked in Bristol ever talked?

Last edited by potential; 07-11-08 at 11:28 AM. Reason: repetition
Closed Thread

Tags
alternatives, cars, ramblings


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 08:28 PM.


This is the live site

Content Relevant URLs by vBSEO 3.6.0 PL2