Any suggestions for alternatives to a Bristol?

[406Special]

Mr Potential,

It is all a matter of money and taste, as well as risk assessment based on
availability of parts and expertise. Apart from bodywork and some
suspension bits, the Bristol (V8 ones anyway) shares lots of common cheap,
mass produced, easy to obtain new bits with relatively simple design -
effective, low stress items mostly. Even electrics are simple. In fact the
Bristol is probably the easiest of your list to own as a going concern due
to its simplicity although the Reliant will be more so when factoring in the
suspension. Bristol front and rear suspension (especially rear) can be
expensive (a couple of grand) to rebuild to like new.

Your 450 SL Merc will be terrific to own but much more costly to rebuild and
will need more expertise than a Bristol. It is also much more common (!) on
the roads but is appreciating well. There is a huge support network of
parts suppliers, body shops and dealers - but they will charge good money.
It is only a two seater unless you includethe SLC - barely a 4 seater.

The Rover is solid but of a different nature and style to either of the
first two - more old-fogey than swift understated sports (2 or 4 seater).
Parts should not be a problem considering the owner's club and numbers
produced. The Bristol is still simpler (rear suspension aside).

The Reliant is very simple and no where near the quality and style of the
Merc or the Bristol. Not my cup-of-tea.

All boils down to cost of running and owning plus what you expect / prefer.
The Bristol (V8) is pretty quick and can be made to be very fast (easily
extract 350-450bhp), is somewhat thirsty if used a lot and is not flashy or
complicated - read as inexpensive to maintain. You can upgrade a Bristol V8
with more modern stuff - like a more efficient engine and gearbox combo as
well as other "factory" or third party bits. The underlying philosophy
remains even with improved cost of ownership and driving appeal.

The best bet is to meet several people with reasonably decent cars and ask
for a poke about and test drive. As long as the suspension is in good
fettle (the only expensive bit of the mechanicals), the most costly part of
the Bristol is repairing the underlying chassis and alloy panels if
corrosion is rife.

Clyde (of V8 Buyer's guide)