Bristol Ace restoration help

[weldoneinc]

Hello , My name is James and i am in Richmond Va. Usa . I weld and restore cars of all types and i am currently working on a a 1961 Ace . I found this forum and was looking for some help with my project . This car was raced for years then someone tried to make a cobra out of it so it has been cut up pretty bad . I have done most of the metal restoration but it was missing the gas tank and i cannot find one or a good picture of one or measurements . Here are some pictures . the car is mostly fixed now it just needs to be painted . you can see the trunk was cut up to put a fuel cell in it but i have fixed all of that . I am stuck now on the gas tank . no one sells them that i know of in the USA or has a drawing so i could make one .
DSC00637 fixed.jpg

DSC00828 fixed.jpg

DSC00816 fixed.jpg

Thanks for any help James

[californiabristol]

James,

http://andywiltshire.com/AC%20Tanks.htm

has images of the tanks they make. No drawings or dimensions, though.
The images might help if you cannot find blueprints or another car to measure.

Greg

[peter dowdle]

the fuel tank shown in the photo has nothing to do with an ac ace

the ace tank is held low down under the boot , held in by 2 fabricated straps.

the fuel filler comes out on one side not the middle

I had a tank made in Australia , an exact copy of the original which I still have somewhere

you really need to get a look at an original tank and straps to see how it is done

[californiabristol]

Peter,
scrolling down is this image which looks more like the tank you describe.
Regards,
Greg

[peter dowdle]

the shape looks better but I think from memory the filler neck is wrong

[Hillman]

You would probably be better asking the question on AC Owners Club
The USA was one of the Ace's biggest markets and there are many members there who could direct you to a tank supplier or provide you with the information you need.