Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 6 cyl Bristol cars

6 cyl Bristol cars Type 400 to 406 - restoration, repair, maintenance etc

Radiator fluid

Reply
 
Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 17-09-17, 12:20 PM
Member
 
Join Date: Sep 2010
Posts: 260
Default Radiator fluid

Got down to look at the 403 yesterday, after the incident coming back from the BOC BBQ, when the thermostat flew off the scale.

The radiator took about 2.5 liters of coolant. When the level came up I could see a waxy material in the coolant. Could this be Bars leak seal or the dreaded oil in the coolant?

Sitting around on idle the temperature sat at about 80 degrees, but it was much cooler yesterday and I the heater matrix was opened fully too, to reduce the possibility of air locks
Reply With Quote
  #2 (permalink)  
Old 17-09-17, 11:09 PM
Member
 
Join Date: Mar 2009
Location: West Wales.
Posts: 467
Default

Might be worth looking on the barsleak or barseal site as there is lot of information there including photographs of contaminated coolant.
What exactly has been done to the car and the cooling system, has the rad been flushed or replaced and has it had any head gasket issues in the past which could have left a residue of oil in the system, a complete cooling system flush and a pressure test would be a good idea but first make sure the thermostat is ok, some of the repro ones on the market now are total crap.
Geoff
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 08:10 AM.


This is the live site

Content Relevant URLs by vBSEO 3.6.0 PL2