Heater & Blower Cover on 411

[peter dowdle]

Hopefully the last question

I noticed in various photos posted earlier,stitching that formed a rectangular box effect on the upper vertical panel of the cover. My question is, is this purely decorative or is this stitching holding something to the underside of the cover?
What purpose is it there for.

[Kevin H]

Peter,
There is something behind the stitching - see attached photos. It's a rectangle of heavy duty card 2.25mm thick. Except it's not actually cardboard - something much stronger and stiffer than cardboard - it has very little flexibility. It would need a heavy duty industrial sewing machine to do the stitching.

[peter dowdle]

Thanks Kevin.

I guess the board is to stabilize the cover to stop it sagging. Traced some material which should arrive tomorrow so all should be well to have it made up.
Interesting to see your cover the holes for the heater pipes are neater than others we have commented on.

Thanks again

Peter Dowdle

NB Must call in one day and have a look at your car

[Geoff Kingston]

Peter,
The cover I photographed has been cut I suspect to remove it or perhaps even fit it without disturbing the pipes, the one Kevin photographed has not suffered this indignity but it might be worth considering a modification here when making the new one.
Geoff.