Winterburn CDI installation on 408

Fund_Man · #1 (**permalink**) 01-09-19, 06:22 AM

I have ordered a Winterburn unit from Fred Winterburn in Canada. Fitting should be very easy but I need identify the type of tacho (Smiths RVI?) and locate the tacho wiring so i can install a bridge rectifier. Fred has advised that the tacho won't work without the bridge which is simple once I have found the wires etc.

Has anyone fitted one of these to a 408 Mk1......or similar. I suspect not but I thought I'd ask just in case someone could help.

Many thanks

Ian.

Geoff Kingston · #2 (**permalink**) 01-09-19, 11:03 AM

I think there is a wiring diagram for the 408 in the resources section as I remember seeing a previous post with this attached.
Geoff.

Kevin H · #3 (**permalink**) 01-09-19, 01:02 PM

Quote:

Originally Posted by Geoff Kingston

I think there is a wiring diagram for the 408 in the resources section as I remember seeing a previous post with this attached.
Geoff.

There is indeed, it's here;
Resources - Bristol Cars - Owners and Enthusiasts Forum

Fund_Man · #4 (**permalink**) 01-09-19, 06:38 PM

Thank you. I only had a black and white one in a manual that didn't specify the model it referred to so this will be very handy.