Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars

8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc

Advice opinions please

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11 (permalink)  
Old 17-04-20, 09:03 AM
Member
 
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,171
Default

Andrew,
In my humble opinion, if you are going to make any compromises it should not be on the structure of the car and the interior. Both can be far more expensive to restore than any issues with the engine and transmission.

I suspect the 383 and 400 engines in the 411s have better parts availablity than the 318 engine in the 410, but not enough difference to warrant avoiding the 410.

Another thing to pay attention to is the front suspension. There's a bit of information on the potential problem here http://www.bristolcars.info/forums/8...ont+suspension

The distance between the bottom of the front crossmember and the road should be about 5 inches on a 411 (this does vary a little depending on the tyres fitted).

If a car has been standing for a long time or has no record of the brakes being overhauled, then that is also a likely requirement, although that could be said for almost any 50+ yo car.

Also, lift the vinyl cover on heater box and check for rust in the tray beneath the Smiths heater box.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 05:46 AM.


This is the live site

Content Relevant URLs by vBSEO 3.6.0 PL2