Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars

8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc

411 audio systems

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2 (permalink)  
Old 10-02-21, 09:05 AM
Member
 
Join Date: Jul 2008
Location: woodhouse australia
Posts: 264
Default

RICHARD I LIKE THE STYLE OF THE RADIO YOU ARE FITTING, THE MODERN UNITS ARE USUALLY FLASH AND OUT OF CHARACTER WITH AN EARLY 70s CAR.

REGARDING THE SPEAKER PRIOR TO ME OWNING THE CAR SOMEONE MOUNTED 2 SPEAKER AT THE REAR PARCEL SHELF. BUT RATHER THAN SIT THEM ON THE SHELF HE FITTED THEM BELOW THE TRIM BY CUTTING HOLES IN THE REAR PANEL BETWEEN THE SHELF AND THE FUEL TANK. HE USED A FLAT WIRE MESH PLATE DIRECTLY UNDER THE PARCEL SHELF TRIM. ALL YOU SEE IS TWO HOLES AND THE WIRE MESH.

MY 412 ON THE OTHER HAND CAME WITH TWO HUGE SPEAKER BOXES MOUNTED ON THE SHELF. (UGLY) SO I DID AS PER THE 411.

MY FINAL THOUGHT RE SPEAKERS IN THE DOOR . I HATE THE IDEA . YOU COULD LOOK AT MOUNTING THEM UNDER THE DASH POINTING DOWN.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 10:23 AM.


This is the live site

Content Relevant URLs by vBSEO 3.6.0 PL2