Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars

8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc

Getting the engine of a Bristol 410 running for the first time in seven years

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #26 (permalink)  
Old 01-12-13, 11:15 PM
Member
 
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,171
Default

Paul,
I have seen a v8 Bristol (a 412) fitted with an electric fuel pump which was simply used to prime the carburettor before starting, after that the engine used the original mechanical pump.

This was because if the car had been standing for a while one would have to crank the engine a fair bit to allow the mechanical pump to pull sufficient fuel through from the tank. It's possible this was more of a problem here in Australia with our warmer weather which may have resulted in a vapour lock.

Before the use of reduction gear starter motors became commonplace it was reasonably easy to flatten the battery before the old v8 would start!

I just thought I should mention this in case this is the way your car is configured. Obviously if the mechanical fuel pump is no longer there then you're just running on an electric pump
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 07:45 AM.


This is the live site

Content Relevant URLs by vBSEO 3.6.0 PL2